An edge connector is the portion of a printed circuit board (PCB) consisting of traces leading to the edge of the board that are intended to plug into a matching socket. The edge connector is a money-saving device because it only requires a single discrete female connector (the male connector is formed out of the edge of the PCB), and they also tend to be fairly robust and durable. They are commonly used in computers for expansion slots for peripheral cards, such as PCI, PCI Express, and AGP cards.

Edge connector sockets consist of a plastic "box" open on one side, with pins on one or both side(s) of the longer edges, sprung to push into the middle of the open center. Connectors are often keyed to ensure the correct polarity, and may contain bumps or notches both for polarity and to ensure that the wrong type of device is not inserted. The sockets width is chosen to fit to the thickness of the connecting PCB.

The opposite side of the socket is often an insulation-piercing connector which is clamped onto a ribbon cable. Alternatively, the other side may be soldered to a motherboard or daughtercard.

Edge connectors are commonly used in personal computers for connecting expansion cards and computer memory to the system bus. Example expansion peripheral technologies which use edge connectors include PCI, PCI Express, and AGP. Slot 1 and Slot A also used edge connectors; the processor being mounted on a card with an edge connector, instead of directly to the motherboard as before and since.

IBM PCs used edge connector sockets attached to ribbon cables to connect 5.25" floppy disk drives. 3.5" drives use a pin connector instead.

Video game cartridges typically take the form of a PCB with an edge connector: the socket is located within the console itself. The Nintendo Entertainment System was unusual in that it was designed to use a zero insertion force edge connector:[1] instead of the user forcing the cartridge into the socket directly, the cartridge was first placed in a bay and then mechanically lowered into position.

Cixi Lanling Electronic CO.,LTD is a professional manufacture of electronic connector and terminal blocks.

Electric Connectors include:

Pin Header Connector,Female Header Connector,Box Header Connector,IC Socket,

Shrouded Header Connector,IDC Socket Connector,Dip Plug Connector,

Micro Match Connector(Red IDC Socket) ,Ribbon Grey Flat Cable,Edge Card Connector,

Zif Socket Connector,Sip IC Socket(Machine Pin Series) ,Dip Strip Adapter,

DIN41612 Eurocard Connector,Mini Jumper Connector,D-Sub Connector,

D-Sub Metal&Plastic Hoods,Dip Switch,PLCC Socket,Scsi Connector,

Circular Micro Jack Connector,Waterproof Connector,Breadboard, Pcb Jack Etc

Terminal blocks include:

Pcb Screw Terminal block,  Pluggable Terminal Block,  Pcb Spring Terminal Block,

Barrier Terminal Block, Feed Through Terminal Block, Wago Terminal Block Connector

&nb